Active

Contract Opportunity

Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.

TERMS OF DELIVERY ARE F.O.B. DESTINATION TO:

UNICOR, Federal Prison Industries, Inc.

McKean Cut and Sew

6975 Route 59

Lewis Run, PA 16738

Solicitation is issued as a three (3) year fixed price requirements type contract with one (1) base year and two (2) option years, and with an Economic Price Adjustment for PCU313110313110, Fiber, Yarn, and Thread Mills.

Offerors who do not agree with the Producer Price Index listed above are required to submit the price index that they believe is correct to the contracting officer at least five (5) calendar days prior to the due date for offers. The index submitted will be evaluated, and changed by amendment to the solicitation if necessary.

SOLICITATION IS 100% SET-ASIDE FOR SMALL BUSINESS

****************************************************************

THESE ITEMS MUST BE BERRY AMENDMENT COMPLIANT, 100% USA DOMESTIC ONLY, MANUFACTURED ENTIRELY IN THE UNITED STATES OF AMERICA. THIS IS TO INCLUDE THE RAW MATERIALS.

****************************************************************

NON-MANUFACTURER RULE APPLIES: A recipient of a contract set-aside for small business, other than the actual manufacturer or processor, must provide the products of a small business.

The government reserves the right to request bid samples from all offerors in a competitive range prior to a contract award or request a sample from the awardee after contract award.

QUESTIONS PERTAINING TO THIS SOLICITATION WILL ONLY BE ADDRESSED IN WRITING VIA EMAIL TO: Aaron.Mitchell2@usdoj.gov. . NO PHONE CALLS PLEASE.

Questions must be submitted not later than OCTOBER 6, 2023 at 2:00PM CST.

For a list, description and total estimated quantities of all items, refer to Section B.

UNICOR’s desired delivery is 30 calendar days or sooner from receipt of each delivery order issued. Vendors are required to provide their best manufacturing/delivery time for evaluation which will be evaluated under technical factors as a go/no go. Delivery schedule will be established at time of award.

Delivery orders will be issued in accordance with 52.216-19.

Vendors shall submit signed and dated offers email to Aaron.Mitchell2@usdoj.gov.

Due to security considerations, do not send offers via U.S. mail. Offers shall be submitted on the SF1449. OMB Clearance 1103-0018.

Offers shall be submitted on the SF1449. OMB Clearance 1103-0018.

The date and time for receipt of proposals is OCTOBER 13, 2023 at 2:00PM CENTRAL STANDARD TIME. Offer must indicate Solicitation No. CT2343-23, time specified for receipt of offer, name, address and telephone number of offeror, technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation, terms of any expressed warranty, price and any discount terms. Offer must include acknowledgment of all amendments, if any.

NYLON-200-DENIER-FR-URETHANE-CTD-FABRIC

NYLON-200-DENIER-FR-URETHANE-COATED-FABRIC

Nylon-Fabric 60 Inches Wide +2 -0

Color: Blue (Navy)

Unicor Part Number: FAB9662

Unit of Measure: YD

A CERTIFICATE OF CONFORMANCE AND RELATED TEST DATA BELOW SHALL ACCOMPANY

OR PRECEDE EACH SHIPMENT OF MATERIAL. FAILURE TO PROVIDEE THESE

DOCUMENTS MAY BE CAUSE FOR REJECTION OF SHIPMENT.

WEIGHT: 4.5 oz/sq. yd (+/- 5%) IN CONFORMANCE WITH ASTM D3776

COLOR: Navy

LENGTH: 60" (- 0" / + 2")

ROLL PUT UP: 125 Yards (+/- 25 Yards)

MVT: 140 g/sq.m. /24 h IN CONFORMANCE WITHASTM E96 UPRIGHT

MULLEN HYDROSTATE: 240 PSI IN CONFORMANCE WITH ASTM D751

TEAR STRENGTH: 15’’x12’’ IN CONFORMANCE WITH ASTM D5587

BREAKING STRENGTH: 170 LBS X 140 LBS IN CONFORMANCE WITH ASTM D5034

FLAME RESISTANCE MUST PASS TESTING REQUIREMENTS CONTAINED IN OR PROVIDED

FOR DESIGNATED FABRIC AT NFPA 701, CAL117-2013, AND 16 C.F.R. PART 1632,

CLASS B

Attachments/Links

Download All Attachments/Links